Description

Hydraulic Diagonal-Axis Piston Pump HYPEX 63 cm3, 138L/min

HYPEX axial piston pumps with a diagonal-axis design are standardly configured for counterclockwise rotation. The direction of rotation can be changed easily and safely.

As shipped from the factory, the pressure port is installed on the right-hand side of the pump. When viewed from the drive shaft side, the pump rotates counterclockwise. The power take-off (PTO) rotates clockwise. If a power take-off (PTO) with left-hand rotation is used, the direction of rotation of the hydraulic pump must be changed.

Caution! If the pump’s drive shaft is moved while changing the direction of rotation, the axial piston assembly may be damaged. After removing the pressure port, do not rotate the pump’s drive shaft.

The pump must be thoroughly bled before startup.

Technical Data

Connection flange compliant with ISO 7653.
Drive shaft B8 × 32 × 36 compliant with DIN 5462 or ISO 7653.
Designed for use with mineral oils compliant with DIN 51524-2 HLP with a viscosity of 10–750 cSt (mm²/s).
Recommended operating viscosity range: 20–40 cSt (mm²/s).
Required oil filtration: 10 µm, ISO 4406 cleanliness class 18/13.
Inlet pressure range: 0.8–2 bar (absolute pressure).

Technical Specifications:

Design: Constant-pressure pump

Version: Single-circuit pump

Rotation direction: counterclockwise

Max. flow rate (l/min): 138.6

Displacement (cm³/rev.): 63

Max. speed (1/min): 2200

Max. operating pressure (bar): 350

Drive shaft: 8x32x36

Mounting Ø (mm): 80

Adapter plate hole pattern (mm): 80 x 80 (4x)

Outlet connection: G 3/4″ (BSP)

Inlet connection: G1″ (BSP)

Pump type: PA

A (mm): 218

BSP connection: G 3/4″

B (mm): 80

E (mm): 110.5

F (mm): 108

G (mm): 64

Connection A (BSP): G 1″