Description

Power transmission PTO size 2 & 3 PTO for stub 1: 3.8 reinforced cast iron

REINFORCED CAST IRON MULTIPLIER GEAR RATIO 1:3.8 WITH PTO SOCKET FOR TRACTOR SHAFT

Model: T7004-6B

Application:

The gearbox is ideal for driving group 2 (20) and 3 (30) hydraulic pumps with a European-type flange. Designed for use in forestry and construction machinery and many tractors, including C-330, C-360, C-385, ZETOR, MF and others with a PTO output.

The cast iron multiplier is an ideal alternative to aluminium gearboxes, which are 30% weaker. The reinforced design allows for long-term and continuous operation under high loads and high pressures, mainly in forestry and construction.

Technical data of the gearbox:

The gearbox is mounted on the PTO shaft with a latch, which makes it possible to install or remove it quite quickly.

The latch also prevents the gearbox from slipping off the PTO shaft.

Pump mounting: 4 holes, GR20 spacing: 71.5×96.2 or GR30: 98×128

Pump centring flange diameter: 36.5 mm or 50.8 mm

Pump shaft type: conical 1:8

Multiplier ratio: 1:3.8

Multiplier power: 30 kW

PTO socket with latch: PTO standard 1.3/8″ DIN9611

Maximum input speed: max 540 rpm

Maximum output speed: max 2052 rpm

Equipped with a sight glass for checking the gear oil level

Material: body – cast iron, gears – steel

Requires filling with gear oil

For the first use, to increase the service life of the gearbox, it is recommended to change the oil after the first 50 operating hours.