Description

STEERING CONTROL UNIT ORBITROL OSPC 100 CN 150-0183

Our orbitrol does not require a valve cube between the hydraulic lines and the steering orbitrol

Oil Connections – Female Threads [BSP]:

P-1/2″

T-1/2″

A – 1/2″

B – 1/2″

Orbitrol installed under the tractor steering column.

This Orbitrol is like DANFOSS code: 150-0183

Attention according to the codes they do not have the same calibrations or it is not with the same fittings.

The Orbitrol is of the OSPC type, it includes a pressure limiter and shock valves.

It is therefore of the CN type exclusively for closed hydraulic circuits of the John Deere type

4 holes:

A and B exit to the steering cylinder

P: pressure

T: Back to the tank

Pressure limiter: No pressure limiter => closed circuit

Shock valve: 210 / 230 bar

Floor plan 18×150

Best-known OEM equipment:

John Deere: AL55308

Installation on John Deere tractors:

Series 40: Two-wheel drive

1640 (Europe)

2040 (Europe)

2040S (Europe)

2140 (Europe)

3040 (Europe) (Cabin 557669>, W/SG2 Cabin 558050>)

3140 (Europe) (Cabin 557669>, W/SG2 Cabin 558050>)

50 Series: 2 wheel drive

1550 (Europe) (CC2 cab WITHOUT FWD)

1750 (Europe) (CC2 Cab WITHOUT FWD)

1850 (Europe) (CC2 Cab WITHOUT FWD)

1950 (Europe) (CC2 Cab WITHOUT FWD)

1950N (Europe)

2250 TSS (Europe)

2450 TSS (Europe)

2650 TSS (Europe)

2850 (Spanish) (SG2 Cab WITHOUT FWD)

2850 TSS (Europe)

3050 (Europe) (SG2 Cab WITHOUT FWD)

3150 (Spain) (SG2 cabin WITHOUT FWD)

3350 (Spain) (SG2 cabin WITHOUT FWD)

3350 (Europe) (SG2 Cab WITHOUT FWD)